Re: Cowl Lights


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by bobyepsr [70.198.202.42] on Wednesday, June 24, 2015 at 23:35:20 :

In Reply to: Re: Cowl Lights posted by Bill [173.76.101.175] on Wednesday, June 24, 2015 at 15:31:13 :

How to assemble cowl lights.

Here goes an attempt to walk you through it.

1. fasten light socket in reflector and install bulb.
2. place glass in bezel. (notice the notch in bezel and matching tit on lens).
3. place reflector on glass in bezel.
4. now push the V shaped spring clip onto the
reflector. The hooks on the ends of the V
clip into the bezel ring from the back. The
wing like springs that point into the V should now be pressing on the reflector making these parts a single assembly.
5. insert this assembly into cowl light housing
6. put the screw in from the back of the housing, drawing the assembly tight.

The hooks and flat wing like springs on the V tend to rust off. If yours are not good that is most likely why your having problems.
Hope this works for you. Jim



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com