Posted by Kaegi [76.22.23.236] on Thursday, June 11, 2015 at 11:16:01 :
In Reply to: Re: clutch removal posted by pw58 [204.112.126.40] on Thursday, June 11, 2015 at 09:02:26 :
remove the floor pans and center hump, disconnect shift linkages, drivelines from trans and PTO, unbolt dust shield from bottom of bell, unbolt trans from bell, slide it back on long studs or drop it with jack out of the way, remove clutch parts and replace. If fly wheel needs turning it is bolt on with studs and nuts and you have to wrench the nuts off. If you don't have a manual I recommend you get one. working on these older trucks is not like working on later designs. These are designed to be serviced.
Follow Ups: