Re: Steering gear oil seal replacement 1/2 ton


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Greg Coffin [67.173.237.179] on Friday, May 29, 2015 at 14:44:06 :

In Reply to: Steering gear oil seal replacement 1/2 ton posted by Dozerman51 [108.235.117.172] on Thursday, May 28, 2015 at 19:32:34 :

From the post in the archives a CR 12723 was the seal that people were using. It measured 32mm x 48mm x 5mm, and was a little loose in the bore. It also appears to be an obsolete part. However, a 32mm x 48mm x 7mm seal is readily available, as is a 32mm x 50mm x 7mm seal. I don't know if a 50mm seal is too big for the bore, You;d have to measure. It might be worth a try. Both seals have a rubberized covering.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com