Posted by Vaughn [99.14.81.193] on Friday, April 24, 2015 at 23:48:50 :
In Reply to: Hub seal ID help posted by Don in NH [96.61.88.160] on Friday, April 24, 2015 at 18:07:05 :
It cross references to SKF 25071 for a Chrysler vehicle
Accommodated Shaft Diameter: 2.500 inches nominal, Seal Width: 0.423 inches minimum and 0.453 inches maximum
1/2 ton, 3/4 ton, 1.5 ton all use same hub seal
I don't know what vehicle they fit
Follow Ups: