Posted by clueless [186.15.41.85] on Tuesday, April 07, 2015 at 00:54:10 :
In Reply to: i luv this stuff--so posted by clueless [201.237.44.50] on Monday, April 06, 2015 at 20:48:45 :
that would be 1.25 to 1 on the stock ratio
i would really like to drill the tapered hole in the stock knuckle at about 4.5 in from center of the knuckle bearing(more meat)
and looking at the pitman arm there is room to drill another tapered hole in it at 3.75 center which would give me a 1.2 to 1 ratio
this also makes the linkage stronger and further from the tire
almost seems to easy
i must be missing something
Follow Ups: