Posted by johnd on Friday, August 17, 2001 at 6:04PM :
In Reply to: Towing problem with 318 automatic posted by George Wellman on Tuesday, August 14, 2001 at 5:34PM :
Sounds like your torque converter is draining back into the transmission which would be cause by cracked seal rings in the shaft into the converter. Try ( when cold) placing the trans in neutral and reving the engine to about 1500 rpm for about 5-10 seconds before you put it into gear then allow to idle and place into gear and see how it responds. If it goes right into gear without that "wait" then that's your problem.
|
This board is powered by the Mr. Fong Device from Cyberarmy.com |