Posted by gmharris [72.219.148.98] on Sunday, March 15, 2015 at 13:09:12 :
In Reply to: Re: Honed the Cylinder Walls today Pict. posted by Willy-N [72.171.192.61] on Sunday, March 15, 2015 at 12:51:07 :
You need to coordinate the speed of moving the hone in and out with the RPM of the drill.
The faster the RPM, the quicker you move the hone in and out. Keep the RPM fairly slow and it will be easier to get the cross hatch.
Follow Ups: