Posted by Milo in Pa [71.116.23.221] on Sunday, March 15, 2015 at 10:36:56 :
In Reply to: Test Fitting Bed 2 posted by Rick [67.188.190.91] on Saturday, March 14, 2015 at 22:10:45 :
I would check the tailgate for squareness and look how even it is at the top on both sides then move the lower hinge or hinges down some may have to file the hinge hole a little to make it level. Probably the first thing on the fitting of the parts is to use a square to get it close it don't have to be perfect they never were from the factory