Posted by jerryinidaho [24.49.176.137] on Tuesday, February 10, 2015 at 17:04:49 :
In Reply to: Re: Broken or stuck screws new method? posted by Daryl in Oz [202.67.111.206] on Tuesday, February 10, 2015 at 16:23:39 :
I have some of those, too. Square, but tapered. The big problem is the tool is hardened, and brittle. If you are using a very small one, they break very easily. Then they are almost impossible to drill out. I think anything smaller than 1/8" is easier to drill out than using one of these tools.
Follow Ups: