Posted by Daryl in Oz [210.50.40.29] on Saturday, January 24, 2015 at 16:23:56 :
In Reply to: Re: Front Fender Damage - Can I Fix This? posted by Greg Coffin [67.176.56.96] on Saturday, January 24, 2015 at 10:46:54 :
Greg, I found the wire to be tough and similar to spring steel. No matter how hard I tried to get the edge right it wouldn't stay where I wanted it to, so I ended up spreading the crimp to get at the wire, bent it back to correct shape and closed the crimp after I finished the panel shaping. Took a while to close the crimp with multi-grips then hammer and dolly but it looks good now.
Follow Ups: