Posted by jerryinidaho [24.49.176.137] on Thursday, January 08, 2015 at 13:16:21 :
In Reply to: Re: Glad There is ONLY 6 of These! posted by TIM [70.198.135.133] on Thursday, January 08, 2015 at 07:16:59 :
Use an awl, or a small nail to punch some holes around the recessed area on the can where the lid seals. This will allow most of the excess to drain back into the can. The lid will seal the holes when it's in place. This works great for any type of paint.
Follow Ups:
