Re: 3250 kgsx 2.2 equals 7150 lbs pw


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by clueless [186.176.19.90] on Thursday, January 01, 2015 at 19:35:22 :

In Reply to: Re: 3250 kgsx 2.2 equals 7150 lbs pw posted by Kaegi [76.22.23.236] on Thursday, January 01, 2015 at 17:29:16 :

AXLE, FRONT . . . . . . .

Type . . . . . . . . . . . . . Single-Speed, Full-floating; Hotchkiss Drive with Hypoid Drive Gears
Capacity . . . . . . . . . . . 3,750 lbs.
Ratio . . . . . . . . . . . . . . 4.89 or 5.83 to 1
Ring Gear - Pitch Diameter . . . . . . . 9 5/8"
Face Width . . . . . . . . . . . . . . . . . . 1 1/2"
Drive Pinion - Face Width . . . . . . . . 1 3/4"
Mounting . . . . . . . . . . . . . . . . . . . . Overhung
Bearings . . . . . . . . . . . . . . . . . .2 Adjustable Tapered Roller
Differential - Bearings . . . . . . . . . 2 Adjustable Tapered Roller
No. of Pinions . . . . . . . . . . . . . . . . . . . . 4
Wheel bearings, per wheel . . . . . 2 Adjustable Tapered Roller
Steering Knuckle Flange Bearings -
Upper . . . . . . . . . . . . . . . . Leaded Gun Metal Casting
Lower . . . . . . . . . . . . . . . . Adjustable Tapered Roller
Axle Shafts Material . . . . Carbon Molybdenum Steel, Shot Peened
Outer Axle Shafts - Diameter at Center . . . 1 1/4"
Inner Axle Shafts - Diameter at Center . . . .1 5/16"
. . . . . . . . . . . . . . Diameter at Splines . . .1.37"
. . . . . . . . . . . . . . Number of Splines . . . . 16
Housing Type . . . . . . . . . Welded Steel Banjo
. . . . . .Type of Vent . . . .Spring loaded
Lubricant Capacity . . . . . . . . . 6 pints
AXLE, REAR . . . . . . . . . . .

Type . . . . . . . . . . . . . Single-Speed, Full-floating; Hotchkiss Drive with Hypoid Drive Gears
Capacity . . . . . . . . . . . 6,500 lbs.
Ratio . . . . . . . . . . . . . . 4.89 or 5.83 to 1



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com