Posted by Willy-N [72.171.192.59] on Sunday, December 21, 2014 at 21:35:26 :
In Reply to: Re: Minimum wiri..ng to start an engine posted by Randy in NJ [67.84.196.20] on Sunday, December 21, 2014 at 18:12:33 :
Use a "Pos+ starter cable" with a battery connection to the "bolt terminal" on the starter. Then take a wire from the Pos+ battery cable to the coil +Pos. Bolt a Negative Cable to the block to connect to the battery. That's it put a switch on the wire to the coil. Use the push pedal to start. If solenoid is used you need a wire to the solenoid pos+ to turn the engine over.
Follow Ups: