Posted by Steve in NJ [96.242.172.216] on Wednesday, December 17, 2014 at 15:13:02 :
In Reply to: priming oil pump posted by scott 56 [24.130.235.145] on Wednesday, December 17, 2014 at 12:37:11 :
Scott,
I'm rebuilding an engine for the swivel frame now. I plan on using an external 12 volt transfer pump to one of the oil galleys.
Its on the order of this:
http://www.summitracing.com/parts/til-40-524
Any thoughts?
Steve