Posted by Greg Coffin [64.24.135.94] on Sunday, October 12, 2014 at 23:25:09 :
In Reply to: Re: Startin on the winch posted by Nick [99.100.212.49] on Sunday, October 12, 2014 at 20:37:09 :
I don't think it spun the bearing. The casting has a groove inside the bore for the grease to travel in, and the hole in the bushing is 90 to 180 from the grease zerk. Maybe to keep water out, I don't know. Try straightening it, the worst that can happen is you break it.