Re: transfer case continues.

Posted by Vaughn [99.14.88.179] on Saturday, September 13, 2014 at 16:30:34 :

In Reply to: transfer case continues. posted by scott 56 [24.130.235.145] on Saturday, September 13, 2014 at 14:59:42 :

The large flat washers should have pipes pressed in them that the bolt slips through so you can't over tighten the insulators. Do yours have them?

Follow Ups:

• Re: transfer case continues. - scott 56 18:40:48 09/13/2014
  • Re: transfer case continues. - Vaughn 09:38:37 09/14/2014
    • Re: transfer case continues. - Kaegi 11:27:12 09/14/2014

Post a Followup