Try lubing the u-joints.

[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]

Posted by Chris Case [107.201.30.23] on Thursday, September 11, 2014 at 20:13:22 :

In Reply to: Winch woe posted by Gil in Kentucky [139.55.6.103] on Thursday, September 11, 2014 at 14:01:18 :

They are pretty cheesey u-joints. No needles, just a hardened trunnion in hardened sockets. Waay expensive for what you get.

Probably more likely to be rusted up than worn loose. Disengage the dog clutch at the wince, and run it again. Get underneath, without getting hair or limbs wound into the spinning parts, and listen for where the noise is coming from. Maybe use a piece of heater hose held into one ear while holding the other end near the suspect.

http://imageevent.com/bigchriscase/bodymountsurethane

Follow Ups:

Re: Try lubing the u-joints. - Gil in Kentucky 20:24:30 09/11/2014

Post a Followup

Name:
E-Mail:
Subject:
Message:

Optional Link
URL:
Title:
Optional Image Link
URL:

This board is powered by the Mr. Fong Device from Cyberarmy.com