Rubber hose or small funnel on the carb bowel vent.

[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]

Posted by Chris Case [107.201.30.23] on Sunday, August 17, 2014 at 20:44:12 :

In Reply to: Fuel system priming posted by KenW [99.65.177.89] on Sunday, August 17, 2014 at 19:53:19 :

The brass tube you can see inside the carb throat is the bowl vent, cut at an angle, is a direct path into the float bowl. A couple ounces of gas poured in there will keep it running for long enough to get the pump going full blast. May take twice.

Any spillage will just prime the cylinders.

Be sure to re-install the air filter before hitting the key. A major purpose of the filter is as a flame guard.

Te pump should be self priming from there.

http://imageevent.com/bigchriscase/bodymountsurethane

Follow Ups:

Re: Rubber hose or small funnel on the carb bowel vent. - KenW 19:21:55 08/18/2014

Post a Followup

Name:
E-Mail:
Subject:
Message:

Optional Link
URL:
Title:
Optional Image Link
URL:

This board is powered by the Mr. Fong Device from Cyberarmy.com