Posted by Dan (NH) [173.9.49.14] on Thursday, July 31, 2014 at 14:15:11 :
In Reply to: Re: Gil, I still dont understand posted by mikey stone [71.39.211.46] on Thursday, July 31, 2014 at 11:06:29 :
Valve grinding is taking a substantial amount of valve seat off. AKA Valve cutting.
Valve Lapping is using a grit on the valve face to create a cross hatch rough surface to aid in the sealing of the valve.
I always lap the valve seats after they are ground or cut.
Am I wrong here?
Follow Ups: