Posted by Keith in Washington [24.41.55.59] on Tuesday, June 03, 2014 at 14:44:38 :
In Reply to: AZ Find Winch posted by DeanD [208.93.180.75] on Monday, June 02, 2014 at 23:10:46 :
I would strongly suspect that it is a PW MU2 winch. The winch, and back support is correct for a 230 winch set up. The front is a little harder to see. However, you can see then ends of the cable guides and the end where they mount to the bumper and frame.What is different is that someone replaced the front angle iron support with something else.
It looks a little bent on the rear frame support which is not uncommon. The shaft support on the right of the picture may be tweaked but is replaceable.
I think you scored a PW MU2 winch.