Posted by Gil H. Ingram [75.90.195.32] on Monday, June 02, 2014 at 16:42:07 :
In Reply to: Re: total failure posted by Gil H. Ingram [75.90.195.32] on Monday, June 02, 2014 at 16:38:36 :
sure wish for a edit feature. yes valves were lapped and guides replaced did not ream valves moved with on drag at allbut all were easy to move up and down with no drag at all. Compression test before starting was at 120 to 128 psi except Number 5 which had the bent valve it was zero. Don't know if I can replace valve seats On new engines you can't. Air pressure I used was not under pressure just placed nozzle and blew into manifold don't think enough to lift valve but will try the test that dave told me about
Follow Ups: