Posted by Kaegi [98.247.164.246] on Wednesday, May 21, 2014 at 21:07:32 :
In Reply to: Re: Screw lifter adj down, do lowest lift, then turn cam for nex posted by Gil H. Ingram [139.55.33.0] on Wednesday, May 21, 2014 at 18:13:22 :
have to make sure lifter is on low spot on cam, then take big screwdriver and pry them up and over the lifter from the back or you can use the spring compressor sometimes to partially compress them just enough then cock the compressor a bit to let them pop out.
Follow Ups: