Jack the body up off the frame.


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Chriscase [107.194.23.92] on Saturday, April 05, 2014 at 19:56:46 :

In Reply to: Floor quieting posted by S.Bear [72.219.252.19] on Saturday, April 05, 2014 at 19:39:22 :

It should only ride on the rubber mounts.Lok at the lip around the tranny hole in the floor. See if it hasn't been rubbing on the frame for so long it has worn a groove in the top of the frame. When it touches, it transmits every little gear noise directly to megaphone of the cab.

I used 1/2 fender washers, plus some hole sawn slugs that were 1/4" thick. We can actually carry on a conversation inside, on the freeway.

Next project truck has been bed-lined undernaeth, plus the under dash area, and inside the toe kick zones. I plan on doing the bottom of the floors and tranny cover. I bought the tintable two part urethane kit. with splatter gun, for about $110. Add about 10% color coat to it, and it looks waaay cool. Good color match, plus texture.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com