Posted by gmharris [72.219.148.98] on Friday, February 28, 2014 at 18:17:08 :
In Reply to: OK, Here is whatI did... posted by CSCameron [174.26.45.190] on Friday, February 28, 2014 at 13:29:05 :
"Actually, I'm surprised at how little difference there is between 30 and 100 ft/lbs. regarding the distance the nut actually turns."
Once the bearings are bottomed out, it's not going to make much difference whether you use 30 ft/lbs or 100 or 1000 until you begin to crush the bearings.