Posted by Milo in Pa [71.116.24.239] on Sunday, February 23, 2014 at 13:47:38 :
In Reply to: Re: What a PITA posted by Dave [76.92.86.70] on Sunday, February 23, 2014 at 13:03:50 :
Thats what I use Drill a hole on the outer side of the seal then put a sheetmetal screw in and attach the slide hammer screw atachment and if the screw strips out of the hole try again and drill a little smaller hole for more grip. I had 4 holes in one of the hard ones but it came out
Follow Ups: