Posted by Milo in Pa [71.116.24.239] on Saturday, February 22, 2014 at 19:21:24 :
I got the rear axle all done new seals,brake cylinders,gaskets, bearings packed and a slight cut on the rear drums. Then moved to the front and took the knuckles apart and when pulling out the axles the bushings fell out on both sides. Somewhere I read in the archives that someone at sometime made these bushings undersize. I put the new inner seals in then the new bushings and they went in hard all the way until they bottomed out. Good thing I took it apart just to check things out everything other than the bushings looks good so new bearings and races then back together.
Follow Ups: