Posted by Tim Holloway [69.54.28.229] on Thursday, February 13, 2014 at 19:34:57 :
In Reply to: Bearing Race/Cup Removal/Installation and Grease? posted by CSCameron [174.26.88.197] on Thursday, February 13, 2014 at 19:22:49 :
Hi Clark,
To remove the races, you tap them out with a drift punch. There are notches in the hub that give you access to hit the race. Give a couple of taps on one side, then a couple on the other side and repeat as needed. Installation is the reverse of removal.
Tim