Posted by Dean [75.60.63.66] on Sunday, February 09, 2014 at 11:06:33 :
In Reply to: Steel Fabricated Diesel Tank for conversion posted by Alex J [108.39.64.15] on Saturday, February 08, 2014 at 19:10:18 :
Here's the tank I built for my 53 ffpw. Made of cold roll 10 gage (a little extra traction in back) enlarged to 33 gals, moved closer to the center of the frame for better weight distribution. Put a baffle in it, bung in the bottom for drain plug and a large hole for the sender unit so you can get a hand in it if necessary to clean it out. Then sprayed the outside with Raptor bed liner. Mig welded inside and out and pressure check with air and spray bottle with soapy water for leaks.