Posted by Sherman in Idaho [72.47.153.112] on Sunday, February 02, 2014 at 22:41:27 :
In Reply to: Re: Duh! posted by gmharris [71.105.36.203] on Sunday, February 02, 2014 at 21:30:41 :
All good suggestions. I've been looking all over for my old propane torch body with the rubber hose on it that I used for "sniffing" for vacuum leaks. I'd never heard of using acetylene before, but I guess if that's handy it would be okay too. I'll cobble something together. No vacuum hoses on this one, so not much to leak, but rough, lean idle sure is a classic vacuum leak. It will run at high speed w/o any choke. Have not had it out this year to try full throttle. Last year it was okay at full throttle.
Follow Ups: