Posted by Daryl in Oz [210.50.40.11] on Saturday, February 01, 2014 at 16:10:44 :
In Reply to: Re: OT working on dump trailer posted by Chrie P [98.198.236.202] on Saturday, February 01, 2014 at 10:16:12 :
Why not weld a decent angle support to the side of the 3x3, then weld the support to that. Welding the pin to the 3x3 won't last long. Other way is as Jerry says, but you run the risk of shearing the pin - the clevis is designed to share the load on the pin, not push on one side.