Posted by Chriscase [162.192.54.36] on Sunday, January 26, 2014 at 20:21:12 :
In Reply to: OT piston rings posted by Ken from Worcester [24.241.23.13] on Sunday, January 26, 2014 at 16:51:27 :
Overlap the ends to get it in, then shine a light in from the other side and look for light between ring and wall.
Rings start out with about 3/4" gap, and get squashed onto the cylinder. An extra 1/8" isn't necessarily tooo bad. They may wear faster, but how long will it take to get 20,000 miles on a tractor?
Follow Ups: