Posted by Joe Cool [24.76.167.95] on Sunday, January 19, 2014 at 11:12:21 :
In Reply to: Big Flats Rivet posted by Dave Horvath [76.125.248.166] on Saturday, January 18, 2014 at 21:14:58 :
I did then when I re-installed my cross member. I used a cheap air chisel with a finishing head and heated the rivet once it was securely clamped in place.
I was very happy with the results.
Definitely a two person job with one person applying heat and the other using the air chisel.