Plastic bondo spreader or credit card to 'guide' it in.

Posted by Chriscase [108.247.158.2] on Saturday, December 28, 2013 at 20:03:24 :

In Reply to: WINSHIELD RUBBER GASKET INSTALL posted by Earl Callow JR [174.100.52.190] on Saturday, December 28, 2013 at 17:40:42 :

Clean out the groove first.

ChrisP is right, you probably will need to glue it in around the corners. Use black Weatherstrip Adhesive, try to keep it where it wont' show.

Those little spring clamps used as oversized paper clips might help on the corners.

Follow Ups:

• Or slim putty knife. - Chris Case 20:05:06 12/28/2013
  • Lube with paint thinner, it evaporates. - Chris Case 20:06:21 12/28/2013

Post a Followup