Re: I have unbolted, removed snap rings, etc


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by jerryinidaho [64.234.49.226] on Saturday, December 28, 2013 at 14:44:54 :

In Reply to: I have unbolted, removed snap rings, etc posted by bucky [12.202.152.34] on Saturday, December 28, 2013 at 13:55:42 :

I believe I remember giving you that suggestion.
Here is a picture of a set of hubs that were built by Warn for IH. You can see the hole at approx. 3:00 with threads inside. There should be 2 of these on the face of the attaching base of your hubs. If the threads are in good condition, and the snap rings have been removed, you should be able to run two bolts into those holes and push the hubs away from the mounting surface. If you don't have those holes, the only other suggestion I have is to try wedging a couple of old putty knives or something similar in between the surfaces and working you way around. They have to be able to be removed somehow. But the snap rings must be removed. Keep trying, if only so you can clean them and re-lube them. :)



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com