traded el cubano the capt.s old g4 mac pro

Posted by clueless [201.202.29.210] on Saturday, December 28, 2013 at 09:30:06 :

for a dodge ps box---has the 4 bolt mounting holes---but must be a later model than the 74 or so as the splined output shaft is a hair smaller in dia. as the stock ff pitman arm but that is ok cuz i am gonna use the ps box pitman arm with a ff tie rod mated to the stock ff draglink swung forward

the box will be bolted thru the frame to the frame(no bracket to mess with) with the pitman arm swinging horizontally in a similar position as i had mocked up the nissan box---looks like with the dodge pitman arm(shorter) i will have even more tire clearance than with the nissan

must be a reverse rot. as it would work swing wise in ray s mount position cept for the pitman arm but it would not work up front swinging vertically cuz when you turn the wheel right the tires would turn left

so now i know which rotation i would need for any position--could not quite figure that out without one in front of me to see for sure

so by the same token you could use a standard rotation box behind the axle outside the frame bolted thru the frame swinging horizontally with the ps box pitman arm mated to the stock draglink via the stock ff tie rod end

happy holidays

Follow Ups:

• 78064 and ya lo tengo(i got it) and kaegi is right - clueless 14:15:55 12/28/2013
  • 3 in. clearance - clueless 14:23:52 12/28/2013

Post a Followup