Posted by bill in pa. [70.62.183.10] on Thursday, December 05, 2013 at 16:22:42 :
In Reply to: Windshield Frame Repair... posted by CSCameron [174.26.77.215] on Wednesday, December 04, 2013 at 22:55:51 :
Mine had holes in the hollow part not the center bar.
I wrapped it in tape to conform to the contour of the metal.
Then mixed up some fiberglass resin and poured it in until full.
When it was hard I sanded and molded the dried resin to match the frame.. worked very well cant tell its repaired