auxiliary PTO output


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Chris in Tacoma [71.231.16.240] on Wednesday, November 20, 2013 at 15:14:33 :

In Reply to: winch posted by Chris in Tacoma [71.231.16.240] on Wednesday, November 20, 2013 at 14:52:42 :

That is a 1 3/8" 6 spline quick disconnect PTO output. I am going to make a threaded cone log splitting attachment that pops on there. I have a quick disconnect clip pin in place of the shear pin on the Garwood winch, bored the yoke .005" so it would slip on and off the winch easily, put an additional slip yoke in the PTO driveline so I can pull the pin, slide yoke back, move to the 1 1/2" stainless Aux shaft, slide on, repin, and wha la. With the 4 speed transmition, 3 speed brownie, it ranges from about 10 rpm in granny low and underdrive at idle up past 1000 rpm in 4th OD at 750 engine rpm



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com