Posted by clueless [201.202.29.210] on Friday, November 01, 2013 at 12:21:01 :
In Reply to: Re: kaegi posted by Kaegi [98.247.164.246] on Thursday, October 31, 2013 at 21:42:08 :
and have no on hands exp. with the diff. boxes and am only going by what the catalogue shows on all the models
but where would one go to get one out of a 70 something d600
probably mexico but i would think it would be very similar if not to the chevy c60 of same year
which are probably similar to some of these posted in the below link
might as well go with the most readily available
i could use the pc i already made with the ff
tie rod end threaded on the short tie rod i made that threads into the wc62 draglink
question is when i thread into the drag link should i not leave the pcs that fit the ball and the spring in there and cotter key it thru the draglink
or lock it onto the draglink with a nut and lockwasher and cotter key it
Follow Ups: