Posted by Randall [99.98.76.231] on Sunday, October 27, 2013 at 23:28:35 :
Hello, I have a good question that i bet you guys can help me with. Im doing a rebuild on a 1965 WM300 for a guy which he purchased years ago. The dodge door data plate on the truck is without question is original to the truck. The tag says 1965 WM300 Model R65 and various specs about the truck. The tag has the original rivets holding it on there and has a serial number of 70316339. Also it is worth noting that where there usually is a small tag above the large data plate containing the vin has only one rivet and no tag however you can tell one was there at one time because it spun on this one rivet and wore down the paint.We know there was a tag there also because his 1966 has the small tag above the main data plate which contains only the vin number on it held on by two rivets.
I went to t137.com and put the above said serial number in from the main data plate of the 1965 Wm300 into the decoder and it doesn't recognize it. Also i looked through all the serial numbers on the WDX through WM300 serial number page and none matched. We cant figure this out? Can one of you guys shed some light on why this might be?
Follow Ups: