Posted by Neil on Friday, June 08, 2001 at 7:02PM :
In Reply to: Re: FOR SALE***NOS 2 quart size MoPar oil filter assembly posted by Jim on Friday, June 08, 2001 at 10:33AM :
First ...it is a 1/2 inch inlet and outletNOT 3/4 inch..and it will need to be reduced for a 230...but this is by design as then you can use 3/8 inch tubing instead of 1/4 inch as in the smaller filters....it is a 2 quart filter and a bigger line will get more oil through the filter, less friction loss.....You will need 2-1/2" to 3/8" pipe thread bushings...2 pieces of 3/8 steel gas/brake line about 15" long....2-3/8" pipe to inverted flare and 2-3/8" inverted flare to 1/4" pipe to get the oil out and then back into the engine.....about $5.00 worth of parts....this is what I used on my PW....Check your parts books and you will see this is the filter which Chrysler put on......the 1 quart size was for cars!!!!
|
This board is powered by the Mr. Fong Device from Cyberarmy.com |