Re: Motor update

Posted by dave horvath [76.125.248.166] on Friday, September 06, 2013 at 22:06:18 :

In Reply to: Re: Motor update posted by bill in Pa. [184.49.163.123] on Friday, September 06, 2013 at 20:35:39 :

Oil pan bolts are 15 ft lbs

Tighten cylinder head bolts to 50 ft lbs and then to 85 ft lbs as shown from passenger side

7 3 1 5 9

8 4 2 6 10

Intake bolts are 40 ft lbs

Sequence is:

11 7 3 1 5 9

12 8 4 2 6 10

Follow Ups:

• Re: Motor update - bill in pa. 06:12:20 09/07/2013
• Re: Poly 318 torque - Ray Marzolf 22:37:17 09/06/2013
  • Re: Poly 318 torque - dave horvath 20:36:04 09/07/2013
    • Re: Poly 318 torque - Kaegi 12:24:38 09/09/2013
    • Re: PW build - Ray Marzolf 22:47:41 09/08/2013

Post a Followup