Posted by Sterling Luttrell [99.58.180.94] on Wednesday, September 04, 2013 at 14:35:19 :
Going back together with it!
I got my drums back from the machinist. They have new bearings, races, seals, and have been turned. Last night i put them on and the were snug going on which goes to show how worn out my others were. Tires are back on the ground. Also took the winch out and put new seals and gaskets in it. Hopefully that will cure the leaks i was having. Im going back with cornhead grease.
One Question...the back wheel bearings get oil from the rear end gear oil along with grease packed in the bearings. The front however has seals in the axel the keeps oil from passing through the knuckle to the wheel bearings. I packed the bearings with grease is this enough lubrication for front bearings?
Follow Ups: