Posted by mannyc [173.77.221.241] on Thursday, August 08, 2013 at 19:06:14 :
In Reply to: Don't Use A Screwdriver and Hammer posted by gmharris [71.105.44.68] on Thursday, August 08, 2013 at 18:54:43 :
take them to a machinist. if your skills and tools are hammer and screw driver level, you are wasting your time. to be done properly you need to be able to remove the old bushings without harming the castings and then you need to be able to install the pins and ream or turn the pins to achieve a good fit. its a cheap job at a machine shop and well worth it. removing the slop from the pedals is a worthwhile pursuit. john bizal has the proper parts for your project.