I like to drill drain holes at lowest spots.

[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]

Posted by Chris Case [75.36.40.246] on Saturday, July 27, 2013 at 07:39:42 :

In Reply to: powder coating windshield frame posted by mike [68.189.241.22] on Saturday, July 27, 2013 at 00:35:44 :

An old contractor (Dad) taught me: You can not keep water out, only in.

So I drill drain holes through both the inner layer and the outer. Then I flood the hollow inside with primer, paint, and/or oil.

The water comes in through the end joints at the sides. Let it out through the bottom.

Oh, the outer hole ought to be in the back side of the flange, heading forward. That is the low spot.


Follow Ups:


Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com