Clearing out sweptline power wagon parts


[Follow Ups] [Post Followup] [Dodge Power Wagon Forum]


Posted by Doug Cartwright [50.37.84.240] on Friday, July 26, 2013 at 23:01:16 :

HAVE FOR SALE A ...
1967 hd 44F LARGE knuckle FRONT AXLE
1964 D60 rear axle with sure grip
1967 Large drivelines
1967 np201 with large yokes
1964 np201
np 201 x member
201 twin sticks w/mount and rods.
1967 np435 wide ratio tranny
large knuckle new wiper seal kits.(1 per side)
A new nearly new from hr clutch 12" x1"ten spline clutch disk(less than 200 miles)
A nos 12 inch x 1 3/8" clutch disk
A 1 3/8 " NOS input shaft for a wide ratio np 435
61-68 100/200 3 row radiator (Needs lower tank repair)
61-68 300 3 row radiator (good used)
good used 100/200 stock steering boxes
Nos speedo cables (heavy duty 110" long)
nos washer bag with cap ,draw hose and screen (m1a1 Abrams tank,same dimensions as jiffy jet)
1964 complete dash with gauges and radio
nos gray seat cover with hog rings (swepty specific)

The above listed parts are $50 ea + shipping.

I will sell parts off the units also,but will need a fair price to disassemble them.(likely $25-$50 per piece,center chunk=$100)


I also have a wide ratio 435/205 married combo for $350,
A rebuilt Napa 78 f250 ford steering box with dropped pitman arm (for a Dodgy Dan conversion) $250 +shipping
High steer arm for hd 44 or 70 front axle(NOS M725 Kaiser)

These parts will be offered here for one month,or until sold,no more.
Please call 208 285 3672 or 208 301 4306 ce



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Message:
Optional Link
URL:
Title:
Optional Image Link
URL:


This board is powered by the Mr. Fong Device from Cyberarmy.com