Posted by John S [71.112.9.19] on Sunday, July 14, 2013 at 19:26:26 :
In Reply to: Should i take my WM300 to a machine shop? posted by Sterling From TX [99.98.76.231] on Sunday, July 14, 2013 at 14:27:49 :
Sterling I am a toolmaker that is a fancy name for a machinist. I all the posts have given you good advise. The machinist you select may use one of the methods mentioned or not. My opinion and experience says the wax method and removing the bolt heads gives you the best chance to be successful.