Still fighting me.

Posted by Sterling From TX [99.98.76.231] on Sunday, July 14, 2013 at 19:16:26 :

ok i drilled the heads off the two long bolts holding the manifold on. Ive removed all the nuts of of each stud. Iv ran a saw zaw between the manifold and block to break loose the gasket some. It stlll wont budge. I have it soaking in penetrating oil right now. I cant find anything keeping it from coming off. Maybe the two bolts need to be drill out more? I just dont want to widen the holes any.

Follow Ups:

• One short bolt, under carb, against head? - Chris Case 21:33:57 07/14/2013
  • Stud, up underneath, center. nm - Chris Case 21:35:29 07/14/2013
• Re: Still fighting me. - jgreen 19:41:41 07/14/2013
  • Nooooo! - Greg Coffin 22:48:32 07/14/2013
• Oh The Horror ! - gmharris 19:33:38 07/14/2013
• Re: Still fighting me. - John S 19:31:53 07/14/2013
  • Re: Patience, Patience, Patience, - Ray Marzolf 20:38:56 07/14/2013
    • RAY IS RIGHT!!! - Tim in NY 20:16:17 07/15/2013
      • Re: RAY IS RIGHT!!! - Paul (in NY) 20:24:20 07/15/2013
    • Agreed - gmharris 23:13:50 07/14/2013

Post a Followup