Posted by Tim Holloway [69.54.28.229] on Saturday, July 13, 2013 at 09:22:56 :
In Reply to: How to remove intake and exhaust manifold? posted by Sterling From TX [99.98.76.231] on Saturday, July 13, 2013 at 09:01:15 :
Hi Sterlng,
It is easy to miss the stud that is in the center, visible only from below. Once you have them all out, some judicious tapping may be needed to loosen the rust that grows around a couple of the studs.
Be gentle!
Tim
Follow Ups: