Posted by Bob Thompson [172.249.82.253] on Thursday, July 11, 2013 at 20:35:42 :
In Reply to: Die grinder, thin cut off wheels, slice the welds. posted by Chris Case [75.36.39.8] on Thursday, July 11, 2013 at 18:38:09 :
On the Phillips, head you might try using a cut-off wheel to grind a slot for a large screw driver. I prefer an old Proto with a 1/2" hex under the handle, it gives me a lot of leverage. Most likely the screw head will break off, then you can drill and re-tap.