Posted by clueless [201.202.22.114] on Monday, May 06, 2013 at 00:03:40 :
In Reply to: 440 into ffpw posted by Tim Norris [98.216.143.55] on Sunday, May 05, 2013 at 16:16:28 :
and have the drag link on the knuckle arm and the pitman arm on the draglink but off the sbox
swing it around to the front and put it in the same plane it was to the rear and give a gander
i think a psbox on the outside of the frame with the splines facing the frame instead of
poking thru it will work here with the stock pitman arm in it s new position it will still be going on the spline the same direction
looking at dan s pick the box would pretty much go where the shock absorber bracket is and i don t think it would stick out much further than that
i am looking at doing it this way but don t have the box yet to see if it clears the tire etc., my calculations say it might work
be easy to give a gander if you had one in front of you, course it would now have to be standard rotation but if you have the reverse rotation box you could still have a look to see how and where you could mount one in that forward position